|
|
|
|
|
|
|
| |
 |
|
The Genesis 5 / bike rack combo unit combines the Genesis 5 skateboard storage rack with either a five foot or ten foot long bike rack. The five foot long bike rack parks up to five bicycles single sided, and up to ten bicycles double sided. While the ten foot long bike rack parks up to ten bicycles single sided, and up to twenty bicycles double sided. In addition, you can choose to have one Genesis 5 skateboard storage rack attached to one end of the bike rack (securing up to five skateboards), or you can choose to have a Genesis 5 skateboard storage rack attached to both ends of the bike rack (securing up to ten skateboards). The bike rack is designed to be flush mounted to a flat concrete floor surface (hardware for mounting the bike rack to the concrete is not included). The bike rack and Genesis 5 ship separately, and some assembly is required. Tamper resistant hardware is available for mounting the Genesis 5 to the bike rack. Both the bike rack and Genesis 5 come standard with a zinc placed finish to protect them from harsh outdoor environments. Optional powder coated finishes are also available for an additional cost. |
|
|
| |
 |
|
The Genesis 5 / waste receptacle combo unit combines the Genesis 5 skateboard storage rack with a square concrete waste receptacle. Each waste receptacle is made of 2 1/2 inch thick concrete (weighing approximately 400 pounds), and can hold up to four Genesis 5’s (securing up to 20 skateboards). Optional items include a 20 gallon capacity rigid liner and a security cable for securing the lid to the base. Several different concrete colors, lid colors, and lid styles are available. The waste receptacle and Genesis 5 ship separately, and some assembly is required. Note: the waste receptacle does not come pre-drilled with holes, or hardware, for mounting the Genesis 5. However, you can choose to have the Genesis 5 pre-mounted to the waste receptacle for an additional cost, or you can purchase the tamper resistant hardware if you decided to mount the Genesis 5 to the waste receptacle yourself. |
|
| |
 |
Click here to get a quote.
|
These tasteful donor recognition plaques come in either brushed aluminum (silver lettering and border with black background) or bronze (light brown lettering and border with dark brown background). The dimensions for the plaques are 8 inches wide by 6 inches tall. Arial font in uppercase is used, and each line is able to accommodate up to 18 characters (72 characters total). Unless otherwise specified, the top portion of the plaque will read as follows, “SKATEBOARD RACK DONATED BY,” and the lower half is where you would put the name of the individual and/ or organization responsible for the donation. Mounting hardware is included for mounting the plaque to a concrete or masonry brick surface. |
|
|
Copyright © Boardloch®, 2007 |
|
|
|
|
|
|
|
|
|
|
|
|
|
